According to reports, the iPhone 14 and iPhone 14 Plus models are equipped with a removable back glass panel for easier repairs. This makes these iPhone models the first that can be easily opened from the back side of the device since the iPhone 4S.
Although the iPhone 14 looks almost identical to the iPhone 13 on the outside, it is a different story on the inside. Previously, only the front glass was separably removable. Now the back glass can be removed independently of the logic board, making repairs much cheaper.
The operation is very simple to disassemble the back cover:
- First just remove the two 6.8 mm-long pentalobe P2 screws at the bottom edge of the iPhone.
- Then, Unplug the NFC flex cable after the back housing is disassembled.
Since the back cover can be easily disassembled, iPhone 14 users can now change the color of the back cover at will, and no longer worry about the broken back cover glass being difficult to repair.
There are two ways to replace the back cover: One is to replace the glass separately, you need to separate the glass and iron sheet, and then replace with a new back glass. The second is to directly replace the new back cover assembly, and choose your favorite color.
In addition, it is also feasible to replace the back cover with wireless charger chip or iron sheet. If it is to replace the back cover with a wireless charger chip, it is necessary to transplant and replace the original NFC flex cable IC to solve the problem that the flash photo cannot be saved.
If you replace the back cover without the wireless charger chip, you only need to transplant the original wireless charger chip completely.
It should be noted that due to this design feature of the iPhone 14, replacing the back cover will not affect any functions of the iPhone 14, including wireless charging and cameras, and all functions can be used normally.
Pay attention: There is a thermal layer on the back of the back cover of the iPhone 14 for heat dissipation. If it is replaced with a transparent or copy back cover, it may affect the normal cooling function of the phone.
Any more problems, welcome to discuss with us: sales@recoresolutions.com.