According to the original report, users reported that their iPhone 13 was unresponsive despite multiple touches. While this comes and goes, it can be really frustrating at times, especially in emergencies.
The touchscreen is your primary means of control over your iPhone, and if it doesn’t work, your phone doesn’t work. However, while an unresponsive touchscreen — any touchscreen that either doesn’t respond at all to your taps or that responds only occasionally — can be frustrating and alarming, there are a number of simple fixes you can try to get it up and running again.
Why is my iPhone 13 screen not responding to touch?
There are many reasons why you could be having iPhone 13 touch screen issues. Here are some of the most common ones.
1, Dust or debris on your screen
2, Moisture on your hand
3, Obstruction from your case or screen protector.
4, Major temperature changes.
5, An outdated operating system.
6, Interference from your charger or other accessories.
How to fix an iPhone 13 screen that’s unresponsive to touch. The method we discuss today is to solve the problem by replacing the touch screen.
As we previously mentioned about replacing the iPhone 12 Pro Max touch screen in our blog, the method is the same. If you have not heard about it, please click this link: https://blog.recoresolutions.com/index.php/iphone-12-pro-max-external-touch-screen-has-no-pop-up-problem/
The newly launched iPhone 13 plug-in touch screen is 1:1 with the original one. The outer glass has anti-fingerprint coating, supports touch screen wake-up function. What’s more, it can solve the problem of pop-up windows.
For specific steps, please refer to the following:
1. Use a hot air gun to remove the IC from the original LCD.
2. Laminated the new Plug-in touch screen.
3. Install the original IC on the external touch screen flex cable.
4. Use a steel mesh to plant tin on the original flex cable,
( pay attention to the insulation of the cable and the LCD when planting tin).
After the tin is planted, add a small amount of flux to the pad.
5. Take out the short flex cable prepared with the plug-in touch screen, and then solder it on
the pad after alignment, and fix the flex cable with high temperature glue.
6. Fold and align the external touch cable, add tin and solder, and make insulation after the
soldering is completed.
7. Test function, if there is no problem, press the frame to complete the replacement.
The details please refer to our operation video: https://youtu.be/ShCROtJcywk
If you are interested and have any questions, please leave us a message.