Friends who use the iPhone all know that after replacing the original rear camera, you must have seen this “Important Camera Message”. As we have mentioned before, JCID camera repair flex cable can solve this problem, but the operation process is a bit complicated and requires professional skills, because it involves welding.
If you have not heard of this method and are interested in knowing it, you can click the link below: https://blog.recoresolutions.com/index.php/iphone-12-non-genuine-camera-warning-has-been-fixed/
Now here’s the good news, JCID Newly launched a tag-on rear camera repair FPC to solve this problem which makes the operation process more simplified. It also need to match with V1S Pro programmer and divided into two different situations.
Suitable for iPhone 12-14 series (except iPhone 12 Pro).
First: has the original rear camera.
1, Plug the wide angle camera repair board into the JC V1S Pro.
2, Take out the rear camera and turn it on.
3, After the iPhone is connected to v1s pro, scan the code to unbind.
4, Scan the wide angle camera QR Code on the rear camera, scan to unbind.
5, Install the Tag-On camera repair FPC and the original wide-angle camera cable together, and click Cloud Burning on V1S Pro.
6, After burning successfully, put the rear camera back into the phone.
7, Power-on and test function, the non-original prompt disappears.
Second: Without the original rear camera.
1, Use the V1S Pro free unbundling function to unbindle.
2. Take out the rear camera and turn it on.
3, Plug the wide angle camera repair board into the JC V1S Pro, buckle the camera cable on the board.
4, After the iPhone is connected to v1s pro, Click Cloud Burning.
5, Write successful and put the camera back to iPhone, test the camera functions, the non-original prompt disappears.
The following is the detailed operation process, welcome to watch and leave a message: https://www.youtube.com/watch?v=3BiU2h-nKJ4
Pingback: JC V1SE Solve ‘Important Camera Message’ with Tag-On Rear Camera Repair FPC